|
|
KDS260P Keyboard Programmable Push-Pull Syringe Pump
|
Item Number: KDS260P
|
|
This programmable KDS pump provides simultaneous infusion and withdrawal with opposing syringes on a single drive. The KDS260P is an adaption of the KDS210. The pump has been modified to hold an additional syringe so that as one syringe infuses, while the second syringe withdraws at the same rate. The Push/Pull mode is designed for one cycle only. The KDS260P is also available as the KDS 260 without the programmable feature.
Features
- Holds up to four syringes, 10 µl to 60 ml each. With large syringes, the full volume may not be usable.
- Backlit LCD display
- Knob locks/unlocks drive block for effortless, drag-free adjustment
- Simple menu-driven setup:
- select syringe size from displayed table
- dispense volume
- dispense flow rate
- Continuous dispense volume display
- Preset volume control and automatic shut-off
- Settings can be reviewed or changed during operation
- Stall detection
- Choice of unit selection
- Last settings stored in permanent memory
- Built-in RS-232C interface for computer "daisy chaining" up to 100 pumps
- TTL interface for foot switch, timer, relay control, outputs for run indicator, valve control
- Independent rate and volume settings for infusion and withdrawal
- Multiple mode selection:
|
Specifications
|
|
| Syringes (max. no. and size)
|
Holds up to Four syringes 10mu to 60ml each for push-pull, or Two sryinges for one direction
|
| Dimensions
|
11" x 9" x 5.5" (28cm x 23cm x 14cm)
|
| Weight
|
9.5lbs. (4.3kg)
|
| Min Flow Rate (10mu syringe
|
0.001mu/hr
|
| Max. Flow Rate >10ml syringe
|
21ml/min
|
| Max Flow Rate >160ml syringe
|
71ml/min
|
| Max Flow Rate >140ml syringe
|
147ml/min
|
| Linear Force
|
40lbs. (18kg)
|
| Advance Per Microstep
|
0.165 micron (1/16 step)
|
| Max. Step Rate (1/2 step)
|
1600
|
| Min Step Rate
|
1 step/30sec.
|
| Accuracy
|
± < 1%
|
| Reproducibilty
|
± 0.1%
|
| Wired for
|
115/230 volts, 50/60Hz
|
|
Product Reviews
|
|
|