KDS Pico Pump

The KDS Pico pump has infusion and withdrawal capabilities with accurate deliveries of picoliter, nanoliter, microliter and milliliter flow. It is especially designed to hold microliter syringes ranging from 0.5ul to 10ml.
 
The Pico pump will operate continuously in “rate” mode or accurately dispense a specific amount of fluid in “volume” mode. The microstepping pump delivers very smooth and constant flow over the entire flow range. The Pico pump feature non-volatile memory. The pump remembers its last syringe size, flow rate and configuration settings.

Features

• Inexpensive low volume pump
• Dispense fluid and refill syringe
• No calculations necessary
• Hands-free control of pump
• Dependability
• High accuracy low volume delivery
• Infusion/Withdrawal
• Direct unit of flow programming at keyboard
• Footswitch
• 1 year warranty

Specifications
Accuracy	± 0.5%
Reproducibility	± 0.1
Syringe Type	Plastic or glass
Syringe Size	0.5 μl to 10 ml
Flow Rate	1.3 pl/min (using 0.5 μl syringe) to 0.8788 ml/min (using 2 x 10 ml syringes, combined output)
Average Linear Force	25 lb***
Non Volatile Memory	Storage of all settings
RS-232 Serial Port*	Yes
TTL Port**	Footswitch control only
Input Power	12 VDC 1.5 Amps
Drive Moter	1.8° step angle geared 36:1 motor
Motor Drive Control	1/4 microstepping
Motor Step per one revolution of the lead screw	14,400 steps
Step Resolution	0.0184 μm/step
Step Rate	1 pulse in 27.6 sec to 200 steps/sec
Pusher Travel Rate	0.0388 μm/min to 0.8333 mm/min
Dimensions (H x W x D)	11.4 x 22.9 x 11.4 cm (4.5 x 9 x 4.5 in)
Weight	2.3 kg (5 lbs)

* Using a computer to control single or multiple pumps (daisy-chain)
** Using voltage to control the pump (ex. Footswitch control, external valve control)
*** Actual force is higher. Not recommended for applications more than 25 lbs of force