NE-300 Infusion Syringe Pump

<< Previous in New Era Syringe Pumps

Next in New Era Syringe Pumps >>

Price: $302.50

Item Number: NE-300

Quantity:

Email this page to a friend

Features

Holds small or big syringes up to 60 mL

Pump continuously until you stop the pump

Infusion rate can be changed while pumping

Remembers previous settings on power up

Power failure mode allows pump to continue pumping after a reset

Syringe purge mode

Displays total volume dispensed in mL or µL units

Maximum pumping rate of 1500 mL/hr with a 60 mL syringe

Precise reproducible flow rates

Selectable infusion rates units: mL/hr, µL/hr, mL/min, µL/min

Pictured Syringe is for Demonstration purposes only

Does not withdraw, volume target, or have computer interface

Mechanical & Electrical Specifications

Syringe sizes: Up to 60 cc

Number of syringes: 1

Motor type: Step motor

Motor steps per revolution: 400

Microstepping: 1/8 to 1/2 depending on motor speed

Advance per step: 0.2126 uM to 0.8504 uM depending on motor speed

Motor to drive screw ratio: 15/28

Drive screw pitch: 20 revolutions/”

DC connector: 2.1 mm, center positive

Voltage at DC connector: 12V DC at full load

Amperage: 750 mA at full load

Power supply type: Unregulated linear external wall adapter, country and power source specific

Power supply output rating: 12V DC @ 800 mA

Dimensions: 8 3/4” x 5 3/4” x 4 1/2” High

(22.86 cm x 14.605 cm x 11.43 cm)

Weight: 3.6 lbs. (1.63 kg)

Allen Wrench 3/32 Hex

Operational Specifications

Maximum speed: 3.7742 cm/min

Minimum speed: 0.004205 cm/hr

Maximum pumping rate: 1257 ml/hr with a B-D 60 cc syringe

Minimum pumping rate: 0.73 μl/hr with a B-D 1 cc syringe

Maximum force: 35 lbs. at minimum speed, 18 lbs. at maximum speed

Syringe inside diameter range: 0.100 to 50.00 mm

Related Products

Pump-to-Pump Secondary Network Cable Price: Starting at $2.20 Allows networking of two or more syringe pumps to a single computer	"Lockout Disable" Key Price: $11.00 Quantity: Prevent unauthorized or accidental changes to the settings by locking the keypad. The "Lockout Disable" key unlocks the keypad and allows settings to be changed.	OEM-NET Price: $11.00 Quantity: Power supply and secondary cable only. For use when networking two or more OEM NE-500 syringe pumps together. Must use the secondary cable in order to complete this application.	Pump-to-PC Primary Network Cable Price: Starting at $16.50 Allows full control over syringe pumps through your computer
Pump Synchronization Cable Price: $22.00 Quantity: Used for creating a continuous infusion system or dual infusion system	Ana-Box™ – Closed Loop Analog Sensor Interface Price: $108.90 Quantity: Attaches to any pump in the NE-1000 Family	NE-500 OEM Application Syringe Pump Price: Starting at $459.00	NE-1000 Syringe Pump Price: Starting at $825.00 The NE-1000 is a full featured, easy -to-use, and cost effective syringe pump for all of your precision dispensing needs.
NE-1600 Six-Syringe Pump Price: Starting at $1,650.00	NE-1800 Eight-Syringe Pump Price: Starting at $1,650.00	NE-4000 Double Syringe Pump Price: $1,072.50 Quantity:

Product Reviews

Rate This Product:

or Create a Review

(0 Ratings, 0 Reviews)