Special Application: Continuous Infusion(push-pull) & Dual Syringe Pump: Using 2 NE-4000 pumps attached with a cable, one pump will infuse while the other pump refills or have simultaneous infusion.

• Fully programmable; automation capable
• Operates stand-alone or from a computer
• Infusion and withdrawal
• Set a single pumping rate and/or dispensing volume
• Program up to 41 pumping phases that change pumping rates, set dispensing volumes, insert pauses, control and respond to external signals, sound the buzzer
• Network, control, and monitor up to 100 pumps with one computer
• Worldwide power supplies available
• Motor stall detection
• Dispensing accuracy of +/-1%
• Unlimited lifetime technical support
• Two year warranty
  

Maximum Syringe Size:

Although a maximum of a 60 cc syringe is specified, the pump can hold up to a 140 cc syringe but can only open up to about 120 cc lengthwise

High Pressure Notes:

The NE-4000 produces about 15 lbs(7.5 lbs/syringe) of linear force at top speed and about 100 lbs(50 lbs/syringe) at slow speeds. 10 ml/hr is an example of slow speed. The pressure that can be generated is relative to the syringe size. On a 60 ml syringe, this would roughly produce about 30 psi.